使用Aspersa洞悉Linux系统软硬件配置
浏览:2359次 出处信息
我们在做服务器的时候,老大扔给你一台机器,要你在上面开发。通常服务器软件是非常依赖于系统的软硬件的,软件通常是要紧贴硬件的特性,如果我们不能了解机器的硬件,我们就无法高效的开发。
比如说想知道Linux的系统的版本,CPU有几个,内存多少大, 机器什么型号,Raid卡什么型号,硬盘有几个,文件系统是什么样子的,网卡什么型号,文件句柄设置什么的,用到虚拟化技术了吗,网络配置什么样的,目前资源使用是如何?
当然如果你足够有经验的话,这些问题难不倒你,但是你获取完全的这些信息是很麻烦的。
这时候Percona 来救助了。他提供了一整套工具来协助定位MySQL服务器的问题。这套工具适合于大部分的IO服务器。
Aspersa is a collection of open-source system utilities primarily designed to ease the work of Percona consultants. This manual is the primary documentation for Aspersa tools. Please contribute your improvements.
项目地址: http://code.google.com/p/aspersa/
summary的使用文档: http://aspersa.googlecode.com/svn/html/summary.html
我们来参观下效果:
$ sudo . /summary # Aspersa System Summary Report ############################## Date | 2011-01-06 12:11:03 UTC ( local TZ: CST +0800) Hostname | test .flashcache.sqa.cm4 Uptime | 6 days, 2:55, 10 users , load average: 29.97, 27.25, 27.44 System | HP; ProLiant DL380 G7; vNot Specified (Rack Mount Chassis) Service Tag | CNG035SF71 Release | Red Hat Enterprise Linux Server release 5.4 (Tikanga) Kernel | 2.6.18-164.el5 Architecture | CPU = 64-bit, OS = 64-bit Threading | NPTL 2.5 Compiler | GNU CC version 4.1.2 20080704 (Red Hat 4.1.2-44). SELinux | Disabled # Processor ################################################## Processors | physical = 2, cores = 8, virtual = 16, hyperthreading = yes Speeds | 16x2399.382 Models | 16xIntel(R) Xeon(R) CPU E5620 @ 2.40GHz Caches | 16x12288 KB # Memory ##################################################### Total | 70.74G Free | 185.99M Used | physical = 70.56G, swap = 180.00k, virtual = 70.56G Buffers | 930.25M Caches | 6.84G Used | 60.64G Swappiness | vm.swappiness = 0 DirtyPolicy | vm.dirty_ratio = 80, vm.dirty_background_ratio = 10 Locator Size Speed Form Factor Type Type Detail ========= ======== ================= ============= ============= =========== PROC 1 DIMM 1G 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 2D 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 3A 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 4H 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 5E 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 6B 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 7I 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 8F 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 1 DIMM 9C 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 1G 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 2D 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 3A 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 4H 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 5E 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 6B 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 7I 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 8F 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous PROC 2 DIMM 9C 4096 MB 1333 MHz (0.8 ns) DIMM {OUT OF SPEC} Synchronous # Mounted Filesystems ######################################## Filesystem Size Used Type Opts Mountpoint /dev/cciss/c0d0p1 122M 10% ext3 (rw) /boot /dev/cciss/c0d0p2 15G 4% ext3 (rw) / /dev/cciss/c0d0p3 15G 3% ext3 (rw) /var /dev/cciss/c0d0p5 15G 21% ext3 (rw) /usr /dev/cciss/c0d0p6 9.5G 5% ext3 (rw) /home /dev/cciss/c0d0p7 8.6G 31% ext3 (rw) /tmp /dev/mapper/cachedev 1.6T 55% ext3 (rw,noatime,nodiratime,barrier=0) /u01 tmpfs 36G 0% tmpfs (rw) /dev/shm # Disk Schedulers And Queue Size ############################# cciss!c0d0 | [deadline] 512 # Disk Partioning ############################################ Device Type Start End Size ============ ==== ========== ========== ================== # Kernel Inode State ######################################### dentry-state | 144452 138117 45 0 0 0 file -nr | 3060 0 131072 inode-nr | 130370 52 # LVM Volumes ################################################ # RAID Controller ############################################ Controller | HP Smart Array logicaldrive 1 (1.6 TB, RAID 1+0, OK) physicaldrive 2C:1:1 (port 2C:box 1:bay 1, SAS, 300 GB, OK) physicaldrive 2C:1:2 (port 2C:box 1:bay 2, SAS, 300 GB, OK) physicaldrive 2C:1:3 (port 2C:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2C:1:4 (port 2C:box 1:bay 4, SAS, 300 GB, OK) physicaldrive 3C:1:5 (port 3C:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 3C:1:6 (port 3C:box 1:bay 6, SAS, 300 GB, OK) physicaldrive 3C:1:7 (port 3C:box 1:bay 7, SAS, 300 GB, OK) physicaldrive 3C:1:8 (port 3C:box 1:bay 8, SAS, 300 GB, OK) physicaldrive 4C:2:1 (port 4C:box 2:bay 1, SAS, 300 GB, OK) physicaldrive 4C:2:2 (port 4C:box 2:bay 2, SAS, 300 GB, OK) physicaldrive 4C:2:3 (port 4C:box 2:bay 3, SAS, 300 GB, OK) physicaldrive 4C:2:4 (port 4C:box 2:bay 4, SAS, 300 GB, OK) # Virtualization ############################################# Technology | No virtualization detected # Network Config ############################################# Controller | Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) Controller | Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) Controller | Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) Controller | Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet (rev 20) FIN Timeout | net.ipv4.tcp_fin_timeout = 60 Port Range | net.ipv4.ip_local_port_range = 1024 65000 # Interface Statistics ####################################### interface rx_bytes rx_packets rx_errors tx_bytes tx_packets tx_errors ========= ========= ========== ========== ========== ========== ========== lo 751283431 1763251 0 751283431 1763251 0 eth0 2320706371 3237499907 0 1816207099 3507868329 0 eth1 69748430 918193 0 0 0 0 eth2 0 0 0 0 0 0 eth3 0 0 0 0 0 0 sit0 0 0 0 0 0 0 bond0 2390454801 3238418100 0 1816207099 3507868329 0 # Network Connections ######################################## Connections from remote IP addresses 10.232.21.113 38 10.232.21.114 33 10.232.21.115 43 10.232.21.116 38 10.232.21.117 38 10.232.21.118 39 10.232.21.119 37 10.232.21.120 37 10.232.21.121 40 10.232.21.122 42 10.232.21.138 13 10.232.21.139 9 10.232.21.140 9 10.232.21.151 9 10.232.21.152 7 10.232.21.153 7 10.232.21.154 7 10.232.21.155 7 10.232.21.156 7 10.232.21.157 8 10.232.31.221 11 10.232.31.228 10 Connections to local IP addresses 10.232.31.228 489 Connections to top 10 local ports 3306 474 45744 1 45750 1 45751 1 45757 1 45758 1 45764 1 45765 1 45771 1 45772 1 States of connections ESTABLISHED 478 LISTEN 4 TIME_WAIT 21 # Top Processes ############################################## PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12820 mysql 15 0 61.3g 60g 5204 S 930.4 85.5 1727:21 mysqld 3501 root 18 0 163m 5064 4424 S 29.6 0.0 382:44.05 tcprstat 2578 root 10 -5 0 0 0 R 25.7 0.0 1657:52 fct0-worker 22031 root 11 -5 0 0 0 S 4.0 0.0 27:22.33 kcopyd 50 root 10 -5 0 0 0 S 2.0 0.0 191:31.85 events /0 52 root 10 -5 0 0 0 S 2.0 0.0 90:51.61 events /2 58 root 10 -5 0 0 0 S 2.0 0.0 96:40.09 events /8 65 root 10 -5 0 0 0 S 2.0 0.0 18:32.29 events /15 22258 root 10 -5 0 0 0 S 2.0 0.0 11:14.77 kjournald # Simplified vmstat (wait please) ############################ procs ---swap-- -----io---- ---system---- --------cpu-------- r b si so bi bo in cs us sy id wa st 24 7 0 0 8120 4418 4 2 29 12 33 27 0 29 3 0 0 100116 123105 67859 171497 47 17 23 12 0 18 7 0 0 84488 101152 67062 172806 43 15 26 16 0 15 9 0 0 95212 86349 62940 166373 47 16 26 11 0 24 6 0 0 97220 134367 68987 174163 47 18 24 11 0 # The End #################################################### |
玩的开心!
建议继续学习:
- 配置Nginx+uwsgi更方便地部署python应用 (阅读:105399)
- Linux 下 PHP 5.2.x 连接 SQL Server 数据库 FreeTDS 配置笔记 (阅读:10101)
- nginx的配置文件 (阅读:8821)
- Emacs安装配置 (阅读:7304)
- 如何查看Linux 硬件配置信息 (阅读:5863)
- Centos yum 安装nginx+PHP-FPM+eAccelerator+mysql (阅读:5609)
- Apache2中俩种设置PHP的异同 (阅读:5292)
- Linux(Ubuntu 10.04)上安装配置apache+php+mysql+phpmyadmin (阅读:5002)
- 在FreeNAS/BSD搭建基于Nginx+FastCGI+MySQL+PHP的WebServer (阅读:4752)
- 在Mac OS X中运行Apache + PHP + MySQL (阅读:4362)
QQ技术交流群:445447336,欢迎加入!
扫一扫订阅我的微信号:IT技术博客大学习
扫一扫订阅我的微信号:IT技术博客大学习
<< 前一篇:windows下设置路由
后一篇:Linux 查看机器配置信息 >>
文章信息
- 作者:Yu Feng 来源: Erlang非业余研究
- 标签: aspersa 配置
- 发布时间:2011-01-20 22:35:37
建议继续学习
- 配置Nginx+uwsgi更方便地部署python应用
- Linux 下 PHP 5.2.x 连接 SQL Server 数据库 FreeTDS 配置笔记
- nginx的配置文件
- Emacs安装配置
- 如何查看Linux 硬件配置信息
- Centos yum 安装nginx+PHP-FPM+eAccelerator+mysql
- Apache2中俩种设置PHP的异同
- Linux(Ubuntu 10.04)上安装配置apache+php+mysql+phpmyadmin
- 在FreeNAS/BSD搭建基于Nginx+FastCGI+MySQL+PHP的WebServer
- 在Mac OS X中运行Apache + PHP + MySQL
近3天十大热文
- [55] IOS安全–浅谈关于IOS加固的几种方法
- [53] 如何拿下简短的域名
- [52] 图书馆的世界纪录
- [52] android 开发入门
- [50] Go Reflect 性能
- [50] Oracle MTS模式下 进程地址与会话信
- [48] 【社会化设计】自我(self)部分――欢迎区
- [47] 读书笔记-壹百度:百度十年千倍的29条法则
- [36] 程序员技术练级攻略
- [29] 视觉调整-设计师 vs. 逻辑